| I-3020 | I-3020 ART |
| I-3020 ART2 | I-3020-6.4 |
| I-3020-L | I-3020-MLLAC |
| I-3024 |
Blanks & Flat Plates
I-3000
This solid top insert provides a solid base plate that can be modified by the user to meet their particular application needs.
Depth from top of Insert: N/A
Overall Thickness: 8.0 mm
I-3000 (CATALOG DRAWING).pdf
I-3000 MIVBLNK ASSM (CATALOG MODEL).zip
I-3000-N ASSM (CATALOG MODEL).zip
I-3000-R (CATALOG DRAWING).pdf
I-3000-R (CATALOG MODEL).zip
I-3001
This metric breadboard insert provides a removable base plate for mounting equipment using either M5 bolts on 25 mm centers or 1/4” -20 bolts on 1 inch centers.
Depth from top of Insert: N/A
Overall Thickness: 8.0 mm
I-3002
This English breadboard insert provides a removable base plate for mounting equipment using either M5 bolts on 25 mm centers or 1/4” -20 bolts on 1 inch centers.
Depth from top of Insert: N/A
Overall Thickness: 8.0 mm
I-3008
This glass insert provides a large specimen area the full size of the insert. It is made of borofloat polished glass.
Depth from top of Insert: N/A
Overall Thickness: 3.1 mm or .125″
Slide Inserts & Cover Slips
I-3010
This slide insert accepts a single 25×75 mm (1” x 3”) slide. The unit is recessed to place the bottom of a slide about 7.5 mm below the top of the insert.
Depth from top of insert: 7.5 mm
Overall thickness: 7.9 mm
I-3010 – 1X3 (25x75mm) SLIDE INSERT ASSM (CATALOG DRAWING).pdf
I-3010 (CATALOG%20MODEL).zip
I-3012
This is a special version of the I-3010 with a milled-out bottom to allow easy use of piezo objective holders. It is very slightly recessed to place the bottom of a slide about 1.7 mm below the top of the insert.
Depth from top of insert: 1.7 mm
Overall thickness: 8.0 mm
I-3013
I-3014
This slide insert has a 30.5 mm (1.20”) hole in the center with two retaining clips and a milled-out area under the opening. It is similar in design to many OEM manual stage tops. The unit is recessed to place the bottom of a slide about 7.1 mm below the top of the insert.
Depth from top of insert: 7.1 mm
Overall thickness: 8.0 mm
I-3014-40
This is a special version of the I-3014 with a 40 mm (1.57”) hole in the center.
I-3014 ROT
I-3014-20
I-3014-50
I-3014-S
I-3022-B
This slide insert accepts four 25×75 mm (1” x 3”) slides. The unit is recessed to place the bottom of slides about 7.3 mm below the top of the insert.
Depth from top of insert: 7.3 mm
Overall thickness: 8.0 mm
I-3022-M
This slide insert accepts four 25×75 mm slides and has individual spring clips on an axel, which flips down for secure stability. The unit is recessed to place the bottom slides about 7.1 mm below the top of the insert.
Depth from top of insert: 7.3 mm
Overall thickness: 8.0 mm
I-3027
This slide insert accepts either a single 25×75 mm (1” x 3”) or a 50×75 mm (2” x 3”) slide, and has two silver clips to hold the slide in place. The unit is recessed to place the bottom of a slide about 7.2 mm below the top of the insert.
Depth from top of insert: 7.2 mm
Overall thickness: 8.0 mm
I-3028
This is a special version of the I-3021 with a much shallower recession that places the bottom of the slide about 1.5 mm below the top of the insert. Available for upright microscopes that cannot move close enough to achieve correct focusing, although a condenser extender may be needed to obtain Kohler illumination.
Depth from top of Insert: 1.5 mm
Overall thickness: 8.0 mm
I-3033
This insert accepts any dish with a maximum bottom outside diameter of 33.0 mm (1.30”), and places them about 7.4 mm below the top of the insert. The I-3033 is designed to hold any combination of ASI’s stainless steel I-3033-25D and I-3033-20D Sealed Coverslip Dishes (see below). These autoclavable dishes have replaceable 25 mm (0.98”) or 20 mm (0.78”) glass coverslip bottoms, sealed in place by O-rings. Spring clips for secure stability. Dishes do not come with insert.
Depth from top of Insert: 7.4 mm
Overall Thickness: 8.0 mm
I-3033-6X
I-3033-20D
Depth from top of Insert: N/A
Overall Thickness: N/A
I-3033-25D
Depth from top of Insert: N/A
Overall Thickness: N/A
Petri Dish, Flask, & Chambers
I-3016
The I-3016 slide insert provides a 57.9 mm x 26.9 mm (2.28” x 1.06”) opening to securely hold one 57×26 mm (2.25” x 1.0”) LabTek™ chambered slide manufactured by Nalge Nunc. The unit is recessed to place the bottom of the slide about 7.5 mm below the insert top.
Depth from top of Insert: 7.5 mm
Overall Thickness: 8.0 mm
I-3016 X3
This slide insert provides three 57.9 mm x 26.9 mm (2.28” x 1.06”) opening to securely hold three 57 mm × 26 mm (2.25” x 1.0”) LabTek™ chambered slide held by three spring loaded levers. The unit is recessed to place the bottom of the slides about 7.5 mm below the insert top.
Depth from the top to the insert: 7.5 mm
Overall thickness: 8.0 mm
I-3026
This insert accepts 30 mm to 65 mm (1.18” to 2.56”) Petri dishes. The unit places the bottom of a dish about 7.4 mm below the top of the insert.
Depth from top of Insert: 7.4 mm
Overall Thickness: 8.0 mm
I-3034
This insert accepts WillCo dishes with a maximum bottom outside diameters of 33.9 mm (1.33”) and 50.0 mm (1.97). The unit places the bottom of the dishes about 7.3 mm below the top of the insert. Surrounding cavity diameters are 37.7 mm (1.48”) and 54.0 mm (2.12”) to accommodate the dish covers. Hole diameters are 31.3 mm (1.23”) and 47.5 mm (1.97”). Ease of access side slots. Spring clips for secure stability.
Depth from top of Insert: 7.4 mm
Overall Thickness: 8.0 mm
I-3035
This insert accepts Petri dishes with a maximum bottom outside diameter of 35.3 mm (1.39”). The units place the bottom of the dishes about 7.4 mm below the top of the inserts. The surrounding cavity diameters are 41.2 mm (1.62”) and 46.6 mm (1.83”) to accommodate a dish cover. Hole diameters are 31.8 mm (1.25”) and 36.4 mm (1.43”). Ease of access side slots. Spring clips for secure stability.
Depth from top of Insert: 7.4 mm. It doesn’t applied to the 39 mm Petri Dish Insert (I-3039)
Overall Thickness: 8.0 mm
I-3035 (35MM PETRI) (CATALOG DRAWING).pdf
I-3035 (35MM PETRI) (CATALOG MODEL).zip
I-3039
This insert accepts Petri dishes with a maximum bottom outside diameter of 39 mm (1.54”). The units place the bottom of the dishes about 7.4 mm below the top of the inserts. The surrounding cavity diameter are 41.2 mm (1.62”) and 46.6 mm (1.83”) to accommodate a dish cover. Hole diameters are 31.8 mm (1.25”) and 36.4 mm (1.43”). Ease of access side slots. Spring clips for secure stability.
Depth from top of Insert: 7.4 mm.
Overall Thickness: 8.0 mm
I-3050
This insert accepts Petri dishes with a maximum bottom outside diameter of 50.0 mm (1.97”). The units place the bottoms of the dishes about 7.4 mm below the top of the insert. The surrounding cavity diameters are 53.9 mm (2.12”) and 67.0 mm (2.64”) to accommodate a dish cover. Hole diameter are 47.5 mm (1.87”) and 57.0 mm (2.25”). Ease of access side slots. Spring clips for secure stability.
Depth from top of Insert: 7.4 mm
Overall Thickness: 8.0 mm
Multiwell
I-3020
This insert provides a 128.0 mm by 86.1 mm (5.04” x 3.39”) opening that accepts any multiwell microplate with an SBS Standard 127.5 mm x 85 mm (5” x 3 1/3”) footprint; for example, a 96-well microplate. The unit places the bottom of a wellplate about 7.4 mm below the top of the insert.
Depth from top of Insert: 7.4 mm
Overall thickness: 8.0 mm
I-3020 (STANDARD MULTIWELL) (CATALOG DRAWING).pdf
I-3020 (STND MULTIWELL) (CATALOG MODEL).zip
I-3020 ART
This is a special version of the I-3020 with special cutouts on the sides to accommodate a robot’s gripper for the automated insertion and removal of microplates.
Depth from top of Insert: 7.4 mm
Overall thickness: 8.0 mm
I-3020 ART2
I-3020-6.4
I-3020-L
I-3020-MLLAC
This is a special version of the I-3020 with a motorized locking mechanism for holding and releasing multiwell microplates, and special side cutouts to accommodate a robot’s gripper.
Depth from top of Insert: 7.4 mm
Overall thickness: 8.0 mm
I-3020-MLLAC ASSM (CATALOG DRAWING).pdf
I-3020-MLLAC ASSM (CATALOG MODEL).zip
I-3024
The I-3024 insert provides a 128.0 mm x 86.1 mm (5.04” x 3.39”) lowered platform for in vivo mouse imaging. (This is the same opening size that accepts an SBS Standard multiwell microplate.) There are two 21.0 mm (0.83”) off-axis holes for viewing from below. The unit’s recession places the bottom of the specimen about 8.5 mm below the top of the insert.
Depth from top of Insert: 8.5 mm
Overall thickness: 9.5 mm
Special Items & Incubators
I-3015
This insert provides a 75.0 mm x 50.0 mm (2.95” x 1.97”) opening to hold a Siskiyou perfusion chamber. The unit is recessed to place the bottom of the chamber about 4.8 mm below the top of the insert.
Depth from top of Insert: 4.8 mm
Overall thickness: 4.8 mm
I-3017
This insert holds a Bioptechs FCS2 temperature-controlled flow cell.
The unit is recessed to place the bottom of the heater about 7.1 mm below the top of the insert.
Depth from top of Insert: 7.1 mm
Overall Thickness: 8.0 mm
I-3018
I-3019
This insert provides a 99.0 mm x 97.0 mm (3.90” x 3.82”) opening to hold a Dagan HE-100-series thermal stage. The unit is recessed to place the bottom of the heater about 7.0 mm below the top of the insert.
Depth from top of Insert: 7.0 mm
Overall thickness: 8.0 mm
I-3021
The I-3021 insert provides a 127.5 mm x 76.7 mm (5.02” x 3.02”) opening to hold a PARC 3×5 slide. The unit is recessed to place the bottom of the slide about 7.2 mm below the top of the insert.
Depth from top of Insert: 7.2 mm
Overall thickness: 8.0 mm
I-3023-5
I-3023-14
I-3024
This insert provides a 128.0 mm x 86.1 mm (5.04” x 3.39”) lowered platform for in vivo mouse imaging. (This is the same opening size that accepts an SBS Standard multiwell microplate.) There are two 21.0 mm (0.83”) off-axis holes for viewing from below. The unit’s recession places the bottom of the specimen about 8.5 mm below the top of the insert.
Depth from top of Insert: 8.5 mm
Overall thickness: 9.5 mm
I-3025 ABC
This insert provides a 100.1 mm (3.94”) partially circular opening to hold a standard 100 mm semiconductor wafer. The unit is recessed to place the bottom of the wafer about 7.5 mm below the top of the insert.
Depth from top of Insert: 7.5 mm
Overall thickness: 8.0 mm
I-3028-B96
This is a special version of the I-3021 with a much shallower recession that places the bottom of the slide about 1.5 mm below the top of the insert. Available for upright microscopes that cannot move close enough to achieve correct focusing, although a condenser extender may be needed to obtain Kohler illumination.
Depth from top of Insert: 1.5 mm
Overall thickness: 8.0 mm
I-3029
This is a 2-inch Aperture Manual Rotary Stage Insert with an optional 35 mm Petri Dish Holder. The I-3029 allows full 360° coarse rotation by hand at 1° resolution as read from the graduated scale on the platform. Coarse adjustment may be locked, and fine adjustments performed over a 10° range with 1 arc-minute resolution and accuracy using the precision micrometer. Maximum wobble is 1 arc-minute. The stage has a central aperture of 50.8 mm. Custom sample holders can be machined into its top.
Overall thickness: 27.5 mm
I-3029-35
This is a Petri Dish Holder with a central aperture of 30 mm. It can be quickly secured and oriented to the insert with magnetic mount; the 35 mm Petri Dish Holder with hounting hardware ONLY. Can be field installed on existing I-3029 or Standa 7R172 (E) – 2 Rotating Stage.
Overall thickness: 27.5 mm
I-3029-40CS-U
I-3030
I-3030-MF8
I-3031.1