LED Lamp Illuminator & Driver

LED Lamp Illuminator & Drivers

About ASI’s LEDs

ASI’s high intensity LED lamp source and driver is a simple way to provide transmitted light illumination, or even epi-fluorescent excitation when appropriate LED color is used. For transmitted light a white LED is used. LEDs are available in a range of colors with typically 20-30 nm spectral half-widths for fluorescent excitation. The LEDs are rated at 3W and can supply ~100 mW of luminous intensity depending on the specific LED wavelength. Using several beam splitter cubes and LED lamps, it is possible to construct a multi-color LED excitation system with these off-the shelf parts.

More Info

Epi-Illumination

For Epi-Illumination Applications

C60-LAMP-ADPT(Universal Lamp Adapter) allows the MIM-LED-LAMP to be placed on the image side of a C60-TUBE-xx lens assemblies to make it into a excitation light condensers that can generate a collimated light. The lamp adapter contains a field stop aperture.

Trans-Illumination

For Trans-Illumination Applications

The MIM-LED-LAMP can be used with OLY-TRANS-ILLUM kit for transmitted light inverted applications.

The OLY-TRANS-ILLUM kit is based upon the Olympus IX2-LWUCD condenser which combines a long working distance (WD 27 mm) and a high numerical aperture (NA 0.55).

The trans-illumination kit contains the IX2-LWUCD with its 5-position turret and adjustable iris diaphragm. The kit also has a centerable condenser mount, a rack & pinion Z-positioner for condenser focusing, and a high brightness LED lamp illuminator with adjustable field iris.

An optional kit (OLY-DIC-OPTION) of Olympus DIC prism and polarizer components is available for high-contrast, high-resolution images with 20X and 40X objectives.

For additional information on DIC microscopy see: http://www.olympusmicro.com/primer/techniques/dic/discoverview.html http://www.olympusmicro.com/primer/techniques/dic/dicconfiguration.html

Fluorescence Excitation

Fluorescence Excitation Applications

For fluoresence microscopy where multiple wavelengths excitation source are needed , several C60-SHORTPORT can be used to connect Multiple MIM-LED-LAMPS (each with a LED of specified wavelength).

The C60-SHORTPORT have provision for a Dichroic filter to be installed in right angle to redirect Light sources to the same port.

This assembly can then be connected to a C60-TUBE-xx with a C60-LAMP-ADPT to generate a collimated light source.

Datasheets

Technical Drawings

LED Drivers

The MIM-LED-LAMPS can be ordered with one of two kinds

Peak Wavelength in nm	Radiant Power in mW¹	Spectral FWHW in nm	Manufacturer Part #	Manufacturer
365	TBD²	20	LZ1-00-UV00	LED Engin
385	TBD²	20	LZ1-00UB00 – U4 bin	LED Engin
405	TBD²	30	LZ1-00UB00 – U8 bin	LED Engin
455	330	20	LZ1-00B200	LED Engin
480	113	20	LXML-PB02	LumiLeds
490	57	20	SMB1N-490	Roithner Lasertechnik
505	75	20	LXML-PE01-0070	LumiLeds
525	200	50	LZ1-00G100	LED Engin
560	136	100	LXML-PX02	LumiLeds
590	82	80	LXM2-PL01-0000	LumiLeds
590	TBD	14	SMB1N-590-02	Roithner Lasertechnik
625	114	20	ELSH-F5101-OLPNM-AR3R4	Everlight
630	120	20	ELSH-F51R1-OLPNM-AR5R6	Everlight
635	221	20	LZ1-00R102	LED Engin
640	200	25	LXM2-PD01-0050	LumiLeds
660	278	30	LZ1-00R202	LED Engin
680	TBD	14	SMB1N-590-02	Roithner Lasertechnik
740	145	30	LZ1-00R300/302	LED Engin
850	236	30	LZ1-00R400/402	LED Engin
940	330	40	LZ1-00R702-0000	LED Engin
Cool White	272	na	LZ1-00CW00	LED Engin