257 x 231 mm Stage Inserts

Below you can find many of our 257 x 231 mm stage inserts. Please contact us or fill out the form at the bottom of this page if you have any questions regarding these inserts.

257 x 231 mm Stage Inserts Datasheet

Metric or English Plate Insert for MS-8000

The I-8001 or I-8004 Metric or English breadboard insert provides a removable base plate for mounting equipment using M6 bolts on 25 mm centers. or 1/4”-20 bolts on 1-inch centers, plus with other smaller mounting holes around the center at common spacings.
Also available as English 1/4”-20 holes on 1-inch centers [I-8002].

Depth from top of Insert to the sample support lip: N/A
Overall Thickness: 9.5 mm

I-8001 (Metric)

I-8004 (English)

Motorized Rotary Stage Insert

This insert has an RS-3000 motorized rotary stage mounted to an I-8004 plate insert, and, in this case, with a 150 mm diameter vacuum chuck affixed. Resolution is 0.12 arc-minutes with ASI’s closed-loop DC servomotor drive. The top of the vacuum chuck is approximately 60.4mm above the top of the insert.

Depth from top of Insert: 60.4 mm
Overall Thickness: 69.9 mm

RS-3000 & I-8004

Technical Drawings

Motorized rotary stage insert with 150 mm vacuum chuck assembly PDF and STEP Formats

Glass Plate Insert for MS-8000

The I-8008 glass insert provides a large specimen area the full size of the insert. It is made of 4.8 mm (3/16”) chemically strengthened soda lime float glass.

Depth from top of Insert to the sample support lip: N/A
Overall Thickness: 4.8 mm

I-8008

Dual Slide Insert

The I-8012 insert is recessed to place two slides about .050” below the top of the insert allowing the use of two 4.5” X 6” slip glass simultaneously into any MS-8000 stage.

Depth from top of Insert to the sample support lip: 1.27 mm
Overall Thickness: 9.53 mm

I-8012

MS-8000 Standard Insert

The I-8005 insert allows the use of any 110 X 160 mm into a MS-8000 stage.

Depth from top of Insert to the sample support lip: 5.38 mm
Overall Thickness: 9.53 mm

I-8005

Thermal Fisher Insert

The I-8010 insert allows the use of a single 8” x 6” Thermal Fisher Soda Lime Glass into any MS-8000 stage. The I-8011 insert is recessed to place a slide about .350” below the top of the insert.

I-8010 Depth from top of Insert to the sample support lip: 1.02 mm

I-8011 Depth from top of Insert to the sample support lip: 8.89 mm

Overall Thickness: 9.53 mm

I-8010

I-8011

Nikon Wafer Chuck Offset Insert

The I-8030 insert is recessed to place slide about .197” allowing the use of 200 mm wafer chuck offset with any of the Nikon Optiphot microscope into any MS-8000 stage.

Depth from top of Insert to the sample support lip: 5.00 mm
Overall Thickness: 9.53 mm

I-8030

Nikon Wafer Centered Chuck Insert

The I-8032 insert is recessed to place slide about .197” allowing the use of 200 mm wafer chuck centered with the Nikon L-200 microscope into any MS-8000 stage.

Depth from top of Insert to the sample support lip: 5.00 mm
Overall Thickness: 9.53 mm

I-8032

Tri-Slide Insert

The I-8016 insert allows the use of three 3” X 5” cover slip glass plates simultaneously into any MS-8000 stage.

Depth from top of Insert to the sample support lip: 1.27 mm
Overall Thickness: 9.53 mm

I-8016

100 mm Wafer Holder Recessed Insert

The I-8031 insert is recessed to place a slide about .355” below the top of the insert allowing the use of a single 100 mm diameter Wafer holder into any MS-8000 stage.

Depth from top of Insert to the sample support lip: 9.017 mm
Overall Thickness: 9.017 mm

I-8031

200 mm Wafer Holder Recessed Insert

The I-8033 insert is recessed to place a slide about .325” below the top of the insert allowing the use of a single 200 mm diameter Wafer holder into any MS-8000 stage.

Depth from top of Insert to the sample support lip: 8.26 mm
Overall Thickness: 9.53 mm

I-8033