160 x 110 mm Slide Inserts
Below you can find many of our 160 x 110 mm slide inserts. Please contact us or fill out the form at the bottom of this page if you have any questions regarding these inserts.
Universal Insert
The I-3091 universal insert has two adjustable sliders to hold different sized slides, dishes up to 70 mm (2.75”), or a LabTek™ chambered slide. The bottoms of the slides or dishes are recessed about 7.3 mm below the top. The I-3091-P performs the same task under the same specifications than the I-3091 with the different that has been designed to perfectly fit any piezo top plate and avoid damages to the edges of the insert.
Depth from top of insert: 7.3 mm
Overall thickness: 8.0 mm
I-3091
I-3091-P
Technical Drawings
Single Slide Insert
The I-3010 slide insert accepts a single 25×75 mm (1” x 3”) slide. The unit is recessed to place the bottom of a slide about 7.5 mm below the top of the insert.
Depth from top of insert: 7.5 mm
Overall thickness: 7.9 mm
I-3010
Technical Drawings
Single Slide Insert High-Rise Version
This is a special version of the I-3010 with a milled-out bottom to allow easy use of piezo objective holders. It is very slightly recessed to place the bottom of a slide about 1.7 mm below the top of the insert.
Depth from top of insert: 1.7 mm
Overall thickness: 8.0 mm
I-3012
Technical Drawings
Four Slide Insert with Brass Sliders
The I-3022-B slide insert accepts four 25×75 mm (1” x 3”) slides. The unit is recessed to place the bottom of slides about 7.3 mm below the top of the insert.
Depth from top of insert: 7.3 mm
Overall thickness: 8.0 mm
I-3022-B
Technical Drawings
Four-Slide with S.S Clamps Insert
The I-3022-M slide insert accepts four 25×75 mm slides and has individual spring clips on an axel, which flips down for secure stability. The unit is recessed to place the bottom slides about 7.1 mm below the top of the insert.
Depth from top of insert: 7.3 mm
Overall thickness: 8.0 mm
I-3022-M
OEM Hole-Style Slide Insert
The I-3014 slide insert has a 30.5 mm (1.20”) hole in the center with two retaining clips and a milled-out area under the opening. It is similar in design to many OEM manual stage tops. The unit is recessed to place the bottom of a slide about 7.1 mm below the top of the insert.
The I-3014-40 is a special version of the I-3014 with a 40 mm (1.57”) hole in the center.
Depth from top of insert: 7.1 mm
Overall thickness: 8.0 mm
I-3014
I-3014-40
Dual Slide Insert with Clips
The I-3027 slide insert accepts either a single 25×75 mm (1” x 3”) or a 50×75 mm (2” x 3”) slide, and has two silver clips to hold the slide in place. The unit is recessed to place the bottom of a slide about 7.2 mm below the top of the insert.
Depth from top of insert: 7.2 mm
Overall thickness: 8.0 mm
I-3027
Ring Mount Insert
The I-3077 insert has a C60-RING male attached to the top. The I-3077 is designed to hold ASI’s C60-FW and C60-Ring.
Depth from top of insert: N/A
Overall thickness: 13.00 mm
I-3077
Triple Slide Insert
The I-4021 slide insert accepts three 24×50 mm slides/coverslips and has clips on top and bottom to hold slides in place. The unit is recessed to place the bottom of slides about 6.95 mm below the top of the insert.
Depth from top of insert: 6.95 mm
Overall thickness: 8.0 mm
I-4021
Dual Rotating Slide Insert
The I-4022 rotating slide insert accepts a 24×60 mm coverslip or a 25×75 mm (1: x3”) slide and it comes with spring clips to hold the slide in place. The unit is recessed to place the bottom of the slide about 7.4 mm below the top of the insert and allows the slide to be rotated 360 degrees continuously.
Depth from top of insert: 7.4 mm
Overall thickness: 8.0 mm
I-4022