Allows direct support of cameras or other items from bread-board table. An example use case is to support diSPIM cameras from the table to avoid coupling camera fan vibration to the microscope body.
Feet accommodate with either metric or imperial bread board hole spacing. 1.5” stainless steel rods and steel adapters are used to hold heavy loads without flexing. Height and depth of clamp is easily adjusted by user. Steel rods can be cut to desired length.
Kits
Post Mount Kit 1
Supports a camera camera via 50 mm OD tube lens body. Specify height of riser bar (13″, 14″, or 17″, default to 13″) and horizontal length (defaults to 7″) Includes PM-BASE, PM-COLLAR, PM-BAR-xx, PM-CROSS-SUPPORT, PM-BAR-yy, PM-CLAMP-ARM.
- CAM-SUP-K1
Datasheets
CAM-SUP-K1-XX-YY-NR (CATALOG DRAWING).pdf
CAM-SUP-K1-XX-YY (CATALOG DRAWING).pdf
Technical Drawings
Post Mount Kit 2
Supports the camera with an attached FW1000 filterwheel. Special piece connects support with filterwheel body. Specify height of riser bar (13″, 14″, or 17″, default to 13″) and horizontal length (defaults to 7″). Includes PM-BASE, PM-COLLAR, PM-BAR-xx, PM-CROSS-SUPPORT, PM-BAR-yy, PM-CLAMP-ARM
- CAM-SUP-K2
Datasheets
CAM-SUP-K2-XX-YY (CATALOG DRAWING).pdf
Technical Drawings
Post Mount Kit 3
Stainless steel adapter from camera support kit to dovetail. Specify height of riser bar (13″, 14″, or 17″, default to 13″) and horizontal length (defaults to 7″). Includes PM-BASE, PM-COLLAR, PM-BAR-xx, PM-CROSS-SUPPORT, PM-BAR-yy, PM-FW-ARM
- CAM-SUP-K3
Datasheets
CAM-SUP-K3-XX-YY (CATALOG DRAWING).pdf
Technical Drawings
Post Mount Kit 4
Stainless steel support arm with 45 degree face for dovetail connection. Specify height of riser bar (13″, 14″, or 17″, default to 13″) and horizontal length (defaults to 5″). Includes PM-BASE, PM-COLLAR, PM-BAR-xx, PM-CROSS-SUPPORT, PM-BAR-yy, PM-DV-ANGLE. Add DV-6010 for actual dovetail.
- CAM-SUP-K4
Datasheets
CAM-SUP-K4-XX-YY (CATALOG DRAWING).pdf
Technical Drawings
Components
Post Mount Base
Support base for post mount, bolts to imperial or metric breadboard.
- PM-BASE
Technical Drawings
Post Mount Collar
Safety collar for 1.5’ dia. Raisers.
- PM-COLLAR
17” 14”, and 13” Post
1.5” dia. Stainless steel (SS) riser, 17.25”, 14.25” and 12.98”, long 3X M8x1.25 on Ø.984 D.B.C. (diSPIM or RAMM no incubator).
- PM-BAR-17
- PM-BAR-14
- PM-BAR-13
10”, 7” and 5” Post
1.5” dia. Stainless steel (SS) horizontal, 7” long 3X M6x1.0 on Ø.984 D.B.C.
- PM-BAR-10
- PM-BAR-7
- PM-BAR-5
Post Mount Dovetail Adapter
Stainless adapter from camera support kit to dovetail. Unique part for the K-3.
- PM-DV-ADPT
Post Mount Dovetail Angle Adapter
Stainless steel support arm with 45 degree face for dovetail connection. Unique part for the K-4.
- PM-DV-ANGLE
Post Mount Filterwheel Support Arm
Filterwheel support arm. Unique part for the K-2.
- PM-FW-ARM
Post Mount Cross Support
Coated steel cross assembly to connect two 1.5″ dia. bars.
- PM-CROSS-SUPPORT
Post Mount Clamp Arm
Coated steel S-shaped support arm including split ring clamp (ABTS-1058, ABTS-1069, ABTS-1056).
- PM-CLAMP-ARM
Post Mount Dovetail Adapter
Adapter from camera support kit to dovetail DV-6010.
- PM-DV-ADPT
Cube Jack
The Cube Jack 5075 positions and supports C60-CUBES or MIM clamps from either directly beneath, 50 to 75 mm above the table, or with a central post for offset support with a greater range of postioning. It is compatible with both metric and imperial optical tables in addition to Toe Clamps. The Cube Jack is made of anodized aluminum with fine pitch (RMS) threads and comes standard with a lock nut.
- CJ-5075
Technical Drawings
Cube Jack assembly. MIM cube, clamp, and support rod configurations PDF and STEP Formats