Below you can find many of our adapters and fitting components for the MIM system. Please contact us or fill out the form at the bottom of this page if you have any questions regarding adapters and fittings. You can find more information regarding MIM setups and components on our main MIM Page.
Objective adapter for Nikon M25-0.75 threads (NIKON CFI 60 series objectives).
C60-OBJ-M25
Objective adapter for RMS threaded objectives (Olympus).
C60-OBJ-RMS
Objective adapter for M26 x 36 TPI threads (Mitutoyo).
C60-OBJ-M26
Objective adapter for M27 x 1.0 (Zeiss).
C60-OBJ-M27
Six-position manual nosepiece for Nikon.
6P-NIK
Complete two-position motorized objective slider. Includes C60-DUAL-OBJ-SLDR, LS-50M, and two C60-OBJ-XXX (specify threads). Requires one controller servo motor channel.
C60-OBJ-SLDR-MOT-2
Olympus threads. Olympus U-D6REM-1-5 six position motorized nose piece. This is a manual changer.
U-R156 (Manual)
with M25 threads and male C60-RING on bottom. Fits inverted RAMM/MIM with Ti stage.
MEP59320-ASI
with RMS threads and male C60-RING on bottom. Fits inverted RAMM/MIM with Ti stage.
MEP59320-ASI-RMS
Olympus Threads. Fits BX43 microscope and MIM upright.
U-R177A-ASI
Right Angle motorized focus system commonly for inverted MIM configurations with direct mounting of C60-CUBE under objective. Provides > 15 mm focus travel range.
MIM-FC-FOCUS-K
Contains C60-CUBE, C60-RA-OBJ-FC-MNT, C60-OBJ-XXX, C60-RING, LS-50 stage, DV6010. Specify objective threads when ordering. RMS, M25-0.75, or M26 x 32 TPI.
MIM-RA-FOCUS-K
Contains C60-RA-PRISM, C60-OBJ-xxx, C60-RING, LS-50 stage. Specify objective threads when ordering. RMS, M25-0.75 (Nikon CFI 60), or M26 x 32 TPI.
Right angle front surface mirror for use with LS-50 stage.
C60-RA-MIRROR
Used with C60-RA-PRISM and LS-50 stage. Mounts motorized Olympus turret on upright versions. Direct to the cube.
C60-RA-OBJ-DOVE
Objective holder used with C60-RA-MIRROR and LS-50 stage.
C60-RA-OBJ-MNT
Objective mount direct on ring mount.
*Shown with objective adapter.
C60-OBJ-MNT
Objective holder with ~2 mm XY lateral centering adjustment provided.
C60-RA-ADJ-OBJ-MNT
C60-RA-ADJ-OBJ-FC-MNT
Used with C60-RA_PRISM and LS-50 stage. Mounts motorized Olympus turret.
C60-RA-OBJ-FC-MNT
Adapts C60-RING-A to MIM components. Not adjustable.
C60-RA-RING-MNT
Objective adapter, 15 mm long. Allows use of RMS objectives with Nikon M 25-.75 microscope fitting.
C60-RMS-M25-ADPT
Use with LS-50 actuator for two-position objective changer. Requires two C60-OBJ-XXX.
C60-DUAL-OBJ-SLDR
Universal coupling ring for attachments to C60-CUBE. 30 mm clear aperture.
C60-RING
C60-RING-25F – Universal coupling ring for attachments to C60-CUBE with provision for 25 mm filter (set-screw).
C60-RING-32F (RING-D) – Universal coupling ring for attachments to C60-CUBE with provision for 32 mm filter (glue-in).
Universal coupling ring with +/- 2 mm adjustments possible. 25 mm clear aperture.
C60-RING-ADJ
Used to adapt from RING mount to other formats. Scope adapters, 30 mm Cage system, etc…
C60-RING-ADAPTER
C60-RING-C-MALE – Male C60 to male C-mount, tube length +1 mm, stainless steel.
C60-RING-C-FEMALE – Male C60 to female C-mount, 22 mm clear aperture, tube length +1 mm, stainless steel.
Male C60 to male Zeiss (30 mm OD), 22 mm clear aperture, anodized aluminum (formerly stainless steel).
C60-RING-30mm
C60-RING-SM1M – Male C-60 to SM1 male, tube length +1 mm, stainless steel.
C60-RING-SM1F – Male C-60 to SM1 female, tube length +1 mm, stainless steel.
Port covers.
C60-COVER
Aperture stop in 15, 20 or 25 mm diameters. These are installed in the C60-RING.
C60-STOP-15
C60-STOP-20
C60-STOP-25
Aperture stop set. Includes 15, 20, and 25 mm diameter stop rings. These are installed in the C60-RING.
C60-STOP-K
Olympus laser port C to C60 38 mm ring system adapter.
C60-LPC