257 x 231 mm Stage Inserts
Below you can find many of our 257 x 231 mm stage inserts. Please contact us or fill out the form at the bottom of this page if you have any questions regarding these inserts.
Metric or English Plate Insert for MS-8000
The I-8001 or I-8004 Metric or English breadboard insert provides a removable base plate for mounting equipment using M6 bolts on 25 mm centers. or 1/4”-20 bolts on 1-inch centers, plus with other smaller mounting holes around the center at common spacings.
Also available as English 1/4”-20 holes on 1-inch centers [I-8002].
Depth from top of Insert to the sample support lip: N/A
Overall Thickness: 9.5 mm
I-8001 (Metric)
I-8004 (English)
Motorized Rotary Stage Insert
This insert has an RS-3000 motorized rotary stage mounted to an I-8004 plate insert, and, in this case, with a 150 mm diameter vacuum chuck affixed. Resolution is 0.12 arc-minutes with ASI’s closed-loop DC servomotor drive. The top of the vacuum chuck is approximately 60.4mm above the top of the insert.
Depth from top of Insert: 60.4 mm
Overall Thickness: 69.9 mm
RS-3000 & I-8004
Technical Drawings
Motorized rotary stage insert with 150 mm vacuum chuck assembly PDF and STEP Formats
Glass Plate Insert for MS-8000
The I-8008 glass insert provides a large specimen area the full size of the insert. It is made of 4.8 mm (3/16”) chemically strengthened soda lime float glass.
Depth from top of Insert to the sample support lip: N/A
Overall Thickness: 4.8 mm
I-8008
Dual Slide Insert
The I-8012 insert is recessed to place two slides about .050” below the top of the insert allowing the use of two 4.5” X 6” slip glass simultaneously into any MS-8000 stage.
Depth from top of Insert to the sample support lip: 1.27 mm
Overall Thickness: 9.53 mm
I-8012
MS-8000 Standard Insert
The I-8005 insert allows the use of any 110 X 160 mm into a MS-8000 stage.
Depth from top of Insert to the sample support lip: 5.38 mm
Overall Thickness: 9.53 mm
I-8005
Thermal Fisher Insert
The I-8010 insert allows the use of a single 8” x 6” Thermal Fisher Soda Lime Glass into any MS-8000 stage. The I-8011 insert is recessed to place a slide about .350” below the top of the insert.
I-8010 Depth from top of Insert to the sample support lip: 1.02 mm
I-8011 Depth from top of Insert to the sample support lip: 8.89 mm
Overall Thickness: 9.53 mm
I-8010
I-8011
Nikon Wafer Chuck Offset Insert
The I-8030 insert is recessed to place slide about .197” allowing the use of 200 mm wafer chuck offset with any of the Nikon Optiphot microscope into any MS-8000 stage.
Depth from top of Insert to the sample support lip: 5.00 mm
Overall Thickness: 9.53 mm
I-8030
Nikon Wafer Centered Chuck Insert
The I-8032 insert is recessed to place slide about .197” allowing the use of 200 mm wafer chuck centered with the Nikon L-200 microscope into any MS-8000 stage.
Depth from top of Insert to the sample support lip: 5.00 mm
Overall Thickness: 9.53 mm
I-8032
Tri-Slide Insert
The I-8016 insert allows the use of three 3” X 5” cover slip glass plates simultaneously into any MS-8000 stage.
Depth from top of Insert to the sample support lip: 1.27 mm
Overall Thickness: 9.53 mm
I-8016
100 mm Wafer Holder Recessed Insert
The I-8031 insert is recessed to place a slide about .355” below the top of the insert allowing the use of a single 100 mm diameter Wafer holder into any MS-8000 stage.
Depth from top of Insert to the sample support lip: 9.017 mm
Overall Thickness: 9.017 mm
I-8031
200 mm Wafer Holder Recessed Insert
The I-8033 insert is recessed to place a slide about .325” below the top of the insert allowing the use of a single 200 mm diameter Wafer holder into any MS-8000 stage.
Depth from top of Insert to the sample support lip: 8.26 mm
Overall Thickness: 9.53 mm
I-8033