User Tools

Site Tools


Command:RESET (~)

Shortcut ~
Format RESET
Additional Notes about usage on Tiger
RESET is usually a Broadcast command but can be used as a Card-Addressed Command as well. When addressed to a specific card, it resets that card and then the Comm card (required to communicate with the reset card) without affecting other installed cards.

This command causes the controller to do a software reset. A software reset re-initializes all variables back to their pre-assigned values and initializes all positions to 0. Saved settings and system flags are preserved across resets, but not saved positions. Therefore commands like HM require a power cycle instead of a reset. To re-initialize settings to default, use SS X before the reset (see documentation for the SS command; note that on Tiger SS is a card-addressed command).

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181
commands/reset.txt · Last modified: 2021/09/23 17:16 (external edit)