Offers

You are here: / Offers
123

Used/Demo and Overstock Equipment for Sale

Applied Scientific Instrumentation, Inc. (ASI) offers section is the perfect place to obtain products when working with a tight budget, perfect for students and small labs to find quality and tested systems to get your project started. Below you will find some of our special offers on our products.

STIPULATIONS

  • All systems listed here perform to ASI’s submicron reputability specification.
  • All systems or product listed here will be sold “AS IS” with sixty (60) day full warranty.
  • ASI will repair any system sold “AS IS” with REPAIR CHARGES as needed.

MS-2000 XY AUTOMATED STAGE FOR THE ZEISS AXIOVERT-200 AXIS AND/OR OBSERVER MICROSCOPE, NON FLAT TOP

Specifically designed to provide a high resolution, and highly repeatable, means of controlling the X and Y position of the microscope stage. All axes derive their precise control through the use of closed-loop DC servomotors employing high-resolution rotary encoders for positioning feedback. The MS-2000 XY stage utilizes crossed-roller slides, a high-precision lead screw, and zero-backlash miniature geared DC servomotors for smooth and accurate motion. The Z-axis drive also uses ASI’s proven line of closed-loop motor drives, each custom fitted to the microscope. The microprocessor-controlled MS-2000 control unit provides for RS-232 and USB communication with a host computer.

Specifications:

  • XY axis range of travel: 120 mm x 110 mm
  • XY axis resolution (encoder step): 22 mm
  • XY axis RMS repeatability: <700 nm
  • XY axis maximum velocity: 7 mm/sec
  • Max Recommended Load: 5kg

LEARN MORE ABOUT THE MS-2000 AUTOMATED STAGE

Overstock Sale Prices: $7,500.00
Regular Prices:

  • Controller: $ 4,250.00
  • Stages: $ 7,700.00
  • Total: $ 11,950.00

Saving: $4,450.00
Brand new non flat top stage in perfect conditions. Controller may present cosmetic imperfections including exterior corrosion, scratches, surface stains, chipped paint, and others signs of wear or use.
While supplies last

MS-2000 XY AUTOMATED STAGE FOR LEICA DMI-SYSTEMS (SERIES INVERTED) NON FLAT TOP

Specifically designed to provide a high resolution, and highly repeatable, means of controlling the X and Y position of the microscope stage. All axes derive their precise control through the use of closed-loop DC servomotors employing high-resolution rotary encoders for positioning feedback. The MS-2000 XY stage utilizes crossed-roller slides, a high-precision lead screw, and zero-backlash miniature geared DC servomotors for smooth and accurate motion. The Z-axis drive also uses ASI’s proven line of closed-loop motor drives, each custom fitted to the microscope. The microprocessor-controlled MS-2000 control unit provides for RS-232 and USB communication with a host computer.

Specifications:

  • XY axis range of travel: 120 mm x 110 mm
  • XY axis resolution (encoder step): 22 mm
  • XY axis RMS repeatability: <700 nm
  • XY axis maximum velocity: 7 mm/sec
  • Max Recommended Load: 5kg

It won’t work with DMi8.
LEARN MORE ABOUT THE MS-2000 AUTOMATED STAGE

Overstock Sale Prices: $7,500.00
Regular Prices:

  • Controller: $ 4,250.00
  • Stages: $ 7,700.00
  • Total: $ 11,950.00

Saving: $4,450.00
Brand new non flat top stage in perfect conditions. Controller may present cosmetic imperfections including exterior corrosion, scratches, surface stains, chipped paint, and others signs of wear or use.
While supplies last

MS-2000 XY AUTOMATED STAGE FOR NIKON TI AND/OR TE MICROSCOPE, NON FLAT TOP

Specifically designed to provide a high resolution, and highly repeatable, means of controlling the X and Y position of the microscope stage. All axes derive their precise control through the use of closed-loop DC servomotors employing high-resolution rotary encoders for positioning feedback. The MS-2000 XY stage utilizes crossed-roller slides, a high-precision lead screw, and zero-backlash miniature geared DC servomotors for smooth and accurate motion. The Z-axis drive also uses ASI’s proven line of closed-loop motor drives, each custom fitted to the microscope. The microprocessor-controlled MS-2000 control unit provides for RS-232 and USB communication with a host computer.

Specifications:

  • XY axis range of travel: 120 mm x 110 mm
  • XY axis resolution (encoder step): 22 mm
  • XY axis RMS repeatability: <700 nm
  • XY axis maximum velocity: 7 mm/sec
  • Max Recommended Load: 5kg

LEARN MORE ABOUT THE MS-2000 AUTOMATED STAGE

Overstock Sale Prices: $7,500.00
Regular Prices:

  • Controller: $ 4,250.00
  • Stages: $ 7,700.00
  • Total: $ 11,950.00

Saving: $4,450.00
Brand new non flat top stage in perfect conditions. Controller may present cosmetic imperfections including exterior corrosion, scratches, surface stains, chipped paint, and others signs of wear or use.
While supplies last

MS-2000 XY AUTOMATED STAGE FOR OLYMPUS IX71-IX81 MICROSCOPE, NON FLAT TOP

Specifically designed to provide a high resolution, and highly repeatable, means of controlling the X and Y position of the microscope stage. All axes derive their precise control through the use of closed-loop DC servomotors employing high-resolution rotary encoders for positioning feedback. The MS-2000 XY stage utilizes crossed-roller slides, a high-precision lead screw, and zero-backlash miniature geared DC servomotors for smooth and accurate motion. The Z-axis drive also uses ASI’s proven line of closed-loop motor drives, each custom fitted to the microscope. The microprocessor-controlled MS-2000 control unit provides for RS-232 and USB communication with a host computer.

Specifications:

  • XY axis range of travel: 120 mm x 110 mm
  • XY axis resolution (encoder step): 22 mm
  • XY axis RMS repeatability: <700 nm
  • XY axis maximum velocity: 7 mm/sec
  • Max Recommended Load: 5kg

It won’t work with IX73/83.
LEARN MORE ABOUT THE MS-2000 AUTOMATED STAGE

Overstock Sale Prices: $7,500.00
Regular Prices:

  • Controller: $ 4,250.00
  • Stages: $ 7,700.00
  • Total: $ 11,950.00

Saving: $4,450.00
Brand new non flat top stage in perfect conditions. Controller may present cosmetic imperfections including exterior corrosion, scratches, surface stains, chipped paint, and others signs of wear or use.
While supplies last

543 NM ALIGNMENT, 0.25 NA FIBER COLLIMATORS W/FC CONNECTOR

Sale Prices: $100.00
Regular Prices: $155.00
Saving: $55.00
Part #:47-218
Inquire for Availability

These components are designed to collimate/focus light exiting a fiber to a desired beam diameter or spot size. The lenses are diffraction limited, so they can achieve spot sizes down to a few microns. Lenses also feature an antireflection coating for low back reflection. These units are designed so that they can be used in pairs to couple the input and output light of optical devices. Optimum performance for long-term use is ensured by the factory set and tested lens alignment. Typical applications can include use with fiber coupled lasers, pigtailed receptacles, etc.

Comments, Questions, and/or Request to Buy one of the Products Above