PZMU-2000 Piezo-Z Top Plate

About the PZMU-2000

The PZMU-2000 is a precise piezo Z-axis stage that can be attached to the top of a microscope’s existing XY stage or be used in stand-alone applications. On select models of microscopes, ASI can mount a PZMU-2000 to an OEM stage. We can procure a manual OEM stage for you if necessary.

The PZMU-2000 consists of ASI’s proven piezo-Z top plate mounted within a stand-alone housing. This system can be mounted to any horizontal surface, including on top of a manual XY stage of an upright microscope.

The optional MS1-PZM Controller compliments the ASI PZMU-2000, providing an LCD readout of position, an external focusing knob, RS-232 serial control, home and zeroing controls all in a small 6 x 4 inch (152 x 102 mm) footprint.

The PZMU-2000 has been specifically designed to provide a high resolution, and highly repeatable, means of controlling the Z position of a manual microscope stage. The XY axes would remain manually controlled by the original OEM stage controls. The PZMU-2000 accepts standard K-size slide inserts that are available for any sample, i.e., slides, Petrie dishes, multi-well plates, etc. The slide insert is moved in the Z-axis via a piezo element with a range of 100 μm and with nanometer accuracy (200 μm and 500 μm ranges are also available). By moving the sample in the Z-plane, any objective can be used, eliminating twisting wires or needed spacers as required when a piezo element is put onto a single objective. The piezo stage can be controlled remotely with a 0-10 volt D.C. analog input voltage, or optionally, with a PZM-2000 Controller.

More Info

PZMU-2000 Features
  • Closed-loop control of Z-axis for precise and highly repeatable focusing
  • Nanometer-scale resolution, repeatability, and accuracy
  • Proven operation with many popular software packages
PZMU-2000 Specifications
(XY axis range of travel) (Standard OEM Stage)
Z axis range of travel (± 5%) 150 μm, 300 μm, 500 μm (100 μm and 200 μm versions optional)
Z axis resolution 1.5 nm
Z axis maximum velocity with settling time 5 mm/sec (~ 10 ms per move)
Z axis resonant frequency (unloaded) > 1 KHz
Z axis top plate maximum load 500 grams
Z axis top plate stiffness (± 20%) 3 N/μm
Z axis top plate in-plane tilt (typical) 10 μrad
Dimensions (L x W x H) 242 x 176 x 19 mm (9½” x 7″ x ¾”)
MS1-PZM Specs
MS1-PZM Controller Specifications
Computer piezo control RS-232 Serial
Manual piezo control Front panel knob
External piezo control 0 – 10 VDC Pass-thru
Position information (regardless of control) LCD Display
Control buttons “Home” and “Zero”
Power module 12 VDC
Adept Specs
Adept Controller Specifications
Specification PZ-2150FT PZ-2300FT PZ-2500FT
Piezo Travel Range (+/- 5%) 150 μm 300 μm 500 μm
Piezo smallest move / resolution* 2.2 nm 4.5 nm 7.6 nm
Maximum Load for full range travel 2Kg 1Kg 1Kg
Transient Response time** 11 – 15 ms
External Analog input (BNC) 0 to 10 Volts
Maximum Input Frequency 20 Hz

**Time taken to travel 10%-90% for moves below 30% travel range with 600 grams load.

*In external input mode, use of a higher bit DAC will increase resolution. For example a 0-10 analog voltage from the DAC results in the following:

External Analog input Steps Resolution
16 Bit DAC 65536 2.2 nm
17 Bit DAC 131075 1.1 nm
18 Bit DAC 262144 0.55 nm
PZMU-2000 Datasheets

PZMU-2000 Stage Datasheet