The MX7630 motorized micromanipulator incorporates our MS-2000 control electronics with SD Instruments' 7600-series stages in the X, Y, and Z axes. Mounted on the Z-axis is a low profile rotating clamp and MXC-45. The low profile clamp allows the user to set the probe angle at an angle from 0° through 180°. The MXC-45's built-in stop allows the experimenter to quickly swing the probe holder our of the sample area and back for quick probe/electrode changes.
The MX7630 is designed as a three-axis micromanipulator to be operated with our MS-2000 joystick controller. The use of the joystick to control the motion of the MX7630 is ideal for all microinjection applications.
Performance Specifications
| Maximum load |
5 lbs |
| Travel |
20 mm |
| Encoder resolution |
0.005 µm |
| Backlash |
< 5 µm |
| Point-to-point accuracy |
± 2 µm |
MX7630 Drawing
![[Bullet]](images/bullet.gif){kind=small}