PZ-2000 XYZ Series Automated Stage with Piezo Z-Axis Top Plate

About the PZ-2000 XYZ

The PZ-2000 XYZ stage has been specifically designed to provide a high resolution, and highly repeatable, means of controlling the X, Y, and Z position of the microscope stage. The XY axes derive their precise control through the use of closed-loop DC servomotors employing high-resolution rotary encoders for positioning feedback. By using closed-loop control for the stage position, there is no chance that the stage will become lost, as can occur with open-loop micro-stepped stages after a number of moves and direction changes. The XY stage utilizes crossed-roller slides, high-precision lead screws, and zero-backlash miniature geared DC servomotors for smooth and accurate motion. The top plate of the stage accepts standard K-size slide inserts that are available for any sample, i.e., slides, petri dishes, multi-well plates, etc. The slide insert is moved in the Z-axis via a piezo element with a range of 150 μm with nanometer accuracy (300 μm & 500 μm range is also available). By moving the sample in the Z-plane, any objective can be used, eliminating twisting wires or needed spacers as required when a piezo element is put onto a single objective. The microprocessor-controlled MS-2000 control unit provides for RS-232 and USB communication with a host computer for control of the XYZ axis.

More Info

PZ-2000 XYZ Features
  • Closed-loop control of the X, Y, and Z-axes for precise positioning and highly repeatable focusing.
  • Wide dynamic speed range with adjustable trapezoidal move profiles.
  • Smooth adjustable dual-range joystick control.
  • Backlit LCD display shows X, Y, and Z coordinates “Zero” and “Home” button for simple stand-alone operations.
  • Compact ergonomic tabletop control unit size is 6”D x 9”W x 3”H (9 x 23 x 16½ cm). Rack mount controller with stand-alone joystick is also available.
  • Proven operation with many popular software packages.
  • Travel range will scan full well plate in most circumstances.
XY Specifications for Standard Configuration
XY axis range of travel 120 mm x 110 mm
XY axis resolution (encoder step) 0.088 μm
XY axis lead screw accuracy 0.25 μ/mm
XY axis RMS repeatability < 0.7 μm
XY axis maximum velocity 7 mm/sec
ADEPT Piezo Controller Specifications
Specification PZ-2150 PZ-2300 PZ-2500
Piezo Travel Range (+/- 5%) 150 μm 300 μm 500 μm
Piezo smallest move / resolution* 2.2 nm 4.5 nm 7.6 nm
Maximum Load for full range travel 2Kg 1Kg 1Kg
Transient Response time** 11 – 15 ms
External Analog input (BNC) 0 to 10 Volts
Maximum Input Frequency 20 Hz
Maximum Continuous Output Current 13 mA

**Time taken to travel 10%-90% for moves below 30% travel range with 600 grams load.

*In external input mode, use of a higher bit DAC will increase resolution. For example a 0-10 analog voltage from the DAC results in the following:

External Analog Input Steps Resolution
16 Bit DAC 65536 2.2 nm
17 Bit DAC 131075 1.1 nm
18 Bit DAC 262144 0.55 nm
PZ-2000 XYZ Options
  • XY axes linear encoders for high-accuracy positioning. Linear encoder resolution is 10 nm, with a scale accuracy of 0.3 μm per 10 mm and 3 μm per 100 mm. Positioning resolution at sample is < 50 nm.
  • Auto-focus (requires NTSC or PAL composite video signal).
  • Other lead screw pitches are available for faster XY translation, or for more precise positioning when using standard rotary encoders.
  • Stage wings for even more room for attachments.
PZ-2000 XYZ Product Compatibility
  • Leica – DMI3000, DMI4000, DMI5000, DMI6000, DMIRB, DMIRBE, DMIRE, DMIRE2
  • Nikon – Diaphot 200, Diaphot 300, Diaphot Eclipse TE200, Diaphot Eclipse TE300, Diaphot Eclipse TE2000, Eclipse Ti
  • Olympus – BX50WI, BX51WI, BX61WI, IMT-2, IX50, IX51, IX70, IX71, IX81
  • Zeiss – Axioskop FS, Axiovert 35, Axiovert 100, Axiovert 100M, Axiovert 135, Axiovert 135M, Axiovert 200, Axiovert 200M, Axio Observer, IMC 35