PMT-200 Photomultiplier

About the PMT-200

Various mounting configurations available including female C-mount threads and a flat flange mount with two 3 mm bolt holes 32 mm apart.

More Info

Features
PMT-200 Features
  • High Sensitivity
  • Manual or Externally-Programmable PMT Gain
  • Automatic Overexposure Shutdown
  • Wide Dynamic Range
  • Easy to Use
  • Works with the TG-1000 controller
  • Supports two PMT tubes
  • Manual control as well as PC control thru RS-232 serial communication
Specifications
PMT-100 Specifications
Sensor (Standard) Hamamatsu H5784-03, H10722, H10723
Bandwidth DC to 20kHz
Spectral Response 185 to 920 nm
Sensitivity 150 V/nW to 260 V/nW420nm
Output 0 to 4 V

Control voltage +0.8 V (In the output signal, there is a shot noise associated
with the signal.)

Supported Photosensor Modules
Supported Photosensor Modules


Type Serie No.
Spectral Response
200 400 600 800(nm)
Frequency Response
DC 100 200(kHz)
Photosensitive Area (mm)
Cubic Ratio
Dimensions (mm)
Input Voltage (V)
Feedback Resistance Remarks
H10722 230 to 920 0 to 20 Ø8 1.3 22 X 22 X 60 +/-5 1 MΩ
H10723 230 to 920 0 to 200 Ø8 1.4 51 X 24 X 25 +/-5 100 KΩ
H9306 185 to 900 0 to 20 3.7 x 13 2.3 19 X 53 X 51 +/-15 1 MΩ
H9307 185 to 900 0 to 200 3.7 x 13 2.3 19 X 53 X 51 +/-15 100 KΩ
H11462 185 to 900 20 to 200 4 x 20 8.0 39 X 95 X 50 +/-5 1 MΩ (20kHz) 100kΩ (200kHz)
H7827 300 to 850 20 to 200 Ø15 3.2 26 X 50 X 56 +/-15 1 MΩ (20kHz) 100kΩ (200kHz)
H10492 300 to 850 20 to 200 to 8000 Ø22 5.1 Ø35 x 120 +/-15 1 MΩ (20kHz) 100kΩ (200kHz, 8MHz)
H10493 185 to 850 20 200 8000 Ø25 8.2 Ø35 x 192 +/-15 1 MΩ (20kHz) 100kΩ (200kHz, 8MHz)
Datasheets