====== TN150: Removing the Red Shipping Bracket from the RAMM ======

== Tools Needed: ==
  * 5mm and 6mm driver or Allen wrench

{{ red_1.jpg?direct&300 |}}



STEP 1: Locate the Red shipping bracket on the RAMM. It is attached between the Arch and the Linear Positioner, LS-50, and should be obvious. 	

{{ red_2.jpg?direct&300 |}}

STEP 2:	Locate the six cap screws that retain the bracket. 

{{ red_3.jpg?direct&300 |}}

STEP 3:	The bottom four screws are removed with the 5mm Allen wrench.

{{ red_4.jpg?direct&300 |}}

STEP 4:	The top two screws are removed with the 6mm Allen wrench.

{{ red_5.jpg?direct&300 |}}

STEP 5:	Keep the bracket with the systems shipping containers in case the system must be shipped again.

{{ red_6.jpg?direct&300 |}}

If you have any problems removing or installing the Red Shipping Bracket on the RAMM contact a ASI technician for further instructions on the procedure so that you don’t get frustrated and the system doesn’t get damaged. Thanks.

{{tag>RAMM tech_note howto}}