====== Command:STOPBITS (SB) ======

^Shortcut  |SB| 
^Format  |STOPBITS [X?] [X=n] |
^Units    |Integer [1 or 2] |
^Remembered |Using SS Z |

**N:** Sets the number of stop bits, n, to be used for RS-232 serial communication. The default is one ''1'' stop bit; the other option is two ''2'' stop bits. Use the [[commands:saveset|SAVESET Z]] command to retain the new stop bit setting after power off.

<WRAP center round info 60%>This command is only available on the MS-2000.</WRAP>

{{tag>commands ms2000}}