====== Command:AFLIM (AL) ======

--> For CRISP ^

--> MS2000 and RM2000 Syntax ^

^Shortcut |AL|
^Format  |AFLIM [X=Log_amp_AGC] [Y=LED_intesity_pot] [Z=in_focus_mm]   |
^Remembered |Using SS Z |

<--

--> Tiger Syntax ^

^Shortcut |AL|
^Format  |[Addr#]AFLIM [X=Log_amp_AGC] [Y=LED_intesity_pot] [Z=in_focus_mm]   |
^Type |Card-Addressed|
^Remembered |Using [Addr#]SS Z |

<--

**X/Y:** The X and Y arguments of this command to directly read and write values (0 to 255) to the CRISP electronics digital potentiometers.  <wrap info>Not recommended for use with host software.</wrap>

  * See the [[:commands:lock|LK M]] command to adjust the LogAmp_AGC instead of ''AL X''.
  * See the [[:commands:unlock|UL X]] command to adjust the LED intensity instead of ''AL Y''.
\\
**Z** ''[in_focus_mm]'': The Z-argument specifies the focus precision (in millimeters) when the lock state changes from K or k to F. Useful for automatic checking of desired focus stability.  Also useful to enforce a tighter or looser focus state before indicating a lock condition.  Note that this value is overwritten whenever the NA of the objective is specified via the LR Y command as of November 2015.

<--

--> For Video Autofocus ^

--> MS2000 and RM2000 Syntax ^

^Shortcut |AL|
^Format  |AFLIM [X= x-axis highlight] [Y= y-axis highlight] [Z= safety limit enable]  |
^Remembered |Using SS Z |

<--

--> Tiger Syntax ^

^Shortcut |AL|
^Format  |[Addr#]AFLIM [X= x-axis highlight] [Y= y-axis highlight] [Z= safety limit enable]  |
^Type |Card-Addressed|
^Remembered |Using [Addr#]SS Z |

<--

**X/Y:** The X and Y values set the length and breadth of the Sampled/Highlighted Video area.  Range is 0 to 100, with the value of 0 covering 0% of the video frame and 100 covering 90% of video frame. 

**Z:** The Z value enables or disables the 200 µm safety limit described in the AUTOFOCUS OPERATION section on page 4.  Setting safety limit enable = 1 enables the safety limit; safety limit enable = 0 disables the safety feature.  The default value is 1.  

<WRAP center round important 60%>
**Warning!** Disabling the safety limit could result in damage to your optics, your sample, or your focus drive.
</WRAP>

<asi>$ AL X=80 Y=50 Z=1
:A<CR><LF></asi>
<asi>$ AL
:N-3 </asi>
Error indicates missing arguments
<asi>$ AL X=1000 Y=-12
:N-4</asi>
Error indicates arguments out of range
<asi>$ AL X=90 Y=90
:N-5 </asi>
Error indicates operation failed, try entering one argument at a time
<asi>$ AL X? Y? Z?
:A X=80 Y=50 Z=1</asi>


<--




{{tag>commands tiger ms2000 crisp autofocus}}