20/20 Technology, Inc. manufactures an extensive line of precision temperature and atmosphere controlled chambers and incubators for microbiology applications. Their products are compatible with our complete line of microscope stages .
INCUBATOR 2000 SYSTEM This unique chamber provides a means of keeping specimens at selectable, constant temperature under high humidity and atmosphere control such as CO2 2
Gas is slowly passed through the humidifier chamber where it is saturated with water, brought to the same temperature as the incubator chamber, and then introduced into the incubator chamber. The incubator chamber will accept 35mm and 60mm Petrie dishes, as well as standard microscope slides.
The incubator chamber is covered with a thin glass window which is electrically heated to prevent internal condensation.
Temperature Range Ambient to 50° C
Temperature Accuracy ± 0.2° C
Temperature Stability ± 0.1° C
Gas Purge Rate > 0.1 liters/minute
BIONOMIC SYSTEM© The heart of the BIONOMIC SYSTEM©
All Bionomic Cells may be adapted with a gas purging system that protects the specimen from the outside atmosphere. Two gases such as N2 2
Bionomic Cells designed for low temperatures (less than 12° C) are water cooled to remove excess heat from the cooling elements. A miniature, closed heat exchanger, the HEC-400 eliminates the need of using tap water and drains, preventing any possibility of water spills or floods and is recommended for use with the water cooled cells.
Features
Reaches "SET" Temperature in Seconds
Computer Compatible for Temperature Set and Programmability
EMF-Free for Sub-Nanovolt Probing
Atmosphere Control with Gas Mixing
Unobstructed Optical path for Short Working Distance Objectives
Open Design of Cells for Probe and Micromanipulator Access
Digital Read Out of Cell Temperature at All Times
Temperature Control Range -10° C to +60° C at the press of a button
Temperature Accuracy ± 0.2° C
Temperature Stability ± 0.1° C
BIONOMIC Cells
BIOSTAGE 600©
Adjustable Temperature Range for Biological Specimens (25° C to 55° C)
Precise Temperature Control with Excellent Stability
Ideal for Invitro-Fertilization, Rheology, Cultures
Fits All Microscope Stages, Upright & Inverted
Warming Plates for Most Substrates Optically Clear Path
Temperature Control Range 25° C to 55° C
Temperature Accuracy ± 0.2° C
Temperature Stability ± 0.2° C
Controller Dimensions (LWH) 200 x 145 x 70 mm (8" x 6" x 3")
Power Requirements 120 Vac (±10%), 50-60 Hz
Shipping Weight 3 Kg (6 lbs)
OBJECTIVE HEATERS The OHxx Objective Heater can be used with many oil and water type microscope objectives to prevent thermal transfer between temperature-controlled specimens and the objective. The temperature of the objective is very tightly and accurately controlled with the B600 Temperature Controller over the range of 30° C to 50° C.
Objective diameters can vary over a rather wide range of values so the table below may be used as a guide to select the proper warming ring when ordering. Due to constantly changing manufacturing specifications from the microscope companies and the variety of objectives available, it is advisable to contact our sales staff for assistance in choosing the correct warming ring.
